Kerakoll Fugalite Eco is a certified eco-friendly, vitrified, high-slide, easy to clean grout and adhesive. For grouting joints in all ceramic and mosaic coverings, Kerakoll Fugalite Eco is a liquid ceramic (epoxy) grout that creates smooth, unbroken grout lines that are bacteriostatic and fungistatic, water and stain proof, and feature a high level of chemical and mechanical resistance.
Kerakoll Fugalite Eco is suitable for joints from 0 – 20mm in width.
Kerakoll Fugalite Eco is suitable for porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats. We recommend using a rubber grout float such as the Kerakoll Rubber Grout Float to apply. When cleaning off we recommend using the Kerakoll Cellulose Grouting Sponge along with Kerakoll Fuga Wash Eco as an additive in the wash-water to facilitate cleaning off the grout residue and leave a perfectly smooth surface finish. Use Kerakoll Fuga Soap Eco to remove any hardened streaks or residue from surfaces along with a Kerakoll Abrasive Felt Pad.
Kerakoll Fugalite Eco is only to be used on flooring and walls in indoor, domestic, commercial and industrial applications and street furniture subject to permanent or occasional contact with chemical substances. It is suitable for use in environments subject to heavy traffic, swimming pools, thermal water baths and fountains, heated floors, also in areas subject to thermal shock and freezing.
Kerakoll Fugalite Eco is a two-part grout and adhesive, composed of a 1.77 kg coloured paste (Part A) and a 1.01 kg liquid. Each unit is 3kg total weight.
Kerakoll Fugalite Eco is available in 28 colours and also transparent, however we only stock the following colours as they are the most popular: 01 – White, 02 – Light Grey, 03 – Pearl Grey, 04 – Iron Grey, 05 – Anthracite, 06 – Black, 07 – Jasmine, 08 – Bahama Beige, 44 – Cement Grey, 45 – Limestone, 46 – Ivory – 3kg, 50 – Pergamon, 51 – Silver, 52 – Dove Grey. We can source all other colours from Kerakoll – please contact us if you require another colour not listed here.
Appearance: part A coloured paste / part B straw-coloured liquid
Specific weight: Part A ≈ 1,77 kg/dm³ / Part B ≈ 1,01 kg/dm³ UEAtc
Viscosity: ≈ 100000 mPa · s, rotor 93 RPM 10 Brookfield method
Mineralogical nature of inert material: silicate – crystalline (part A)
Chemical nature: epoxy resin (part A) / polyamines (part B)
Grading: ≈ 0 – 250 μm
Shelf life: ≈ 24 months in the original packaging
Warning: Protect from frost, avoid direct exposure to sunlight and sources of heat
Pack: monopack part A 2,82 kg / part B 0,18 kg
Mixing ratio: part A : part B = 2,82 : 0,18
Specific weight of the mixture: ≈ 1,43 kg/dm3
Pot life at +23 °C: ≥ 45 min.
Temperature range for application: from +5 °C to +30 °C
Joint width: – Classic, Design and Colors from 0 to 20 mm – Extra-fine from 0 to 10 mm
Foot traffic: ≈ 24 hrs
Grouting after laying:
– with Fugalite® Eco on coating materials: immediate
– with Fugalite® Eco on floors: as soon as foot traffic is allowed
– with adhesive: see characteristics of adhesive
– mortar: ≈ 7 – 14 days
Interval before normal use: ≈ 3 days (mechanical resistance) / ≈ 7 days (chemical resist.)
Coverage: – as an adhesive ≈ 2 – 4 kg/m2 – as a grout see Coverage table
Values taken at +23 °C, 50% R.H. and no ventilation. Data may vary depending on specific conditions at the building site, i.e.temperature, ventilation and absorbency level of the
substrate and of the materials laid.