Phone icon

Kerakoll Fugalite Bio Parquet Epoxy Tile Grout

£35.99 (inc VAT)

SKU: N/A Categories: ,


Kerakoll Fugalite Bio Parquet is a water-based hypo-allergenic resin grout for waterproof, stain-proof, wood-effect grouting of porcelain wood-effect tile planks. Can be used on internal and external walls and floors, and is Catas-tested for colour durability in external applications. Approved for marine use.

Kerakoll Fugalite Bio is available in 12 natural shades inspired by the types of wood mainly used for making hardwood floor coverings: 54 – Larix, 55 – Betula, 56 – Acer, 58 – Fagus, 59 – Ulmus, 60 – Quercus, 61 – Castanea, 62 – Milicia, 63 – Afzelia, 64 – Tectona, 65 – Millettia. Please see the colour chart below for an indication.

Kerakoll Fugalite Bio Parquet is a two-part grout, composed of a 2 kg coloured paste (Part A) and a 1 kg liquid. Each unit is 3kg total weight.

Kerakoll Fugalite Bio Parquet is suitable for joints from 0 – 5mm in width. Do not use on joints more than 5 mm in width, or on porous flooring for which more specific or alternative chemical resistances are required compared with those listed in the chemical resistances table, to grout elastic expansion or fractionizing joints or on substrates that are not fully dry and subject to moisture rising. Use the grout calculator below to estimate how much grout you will need for your application. You will need details such as tile size and thickness, joint width and the area size to gain an accurate estimate.

Kerakoll Fugalite Bio Parquet is dermatologically-tested, with the result as hypoallergenic according to a skin tolerance medical experiment conducted at the University of Modena and Reggio Emilia dermatological clinic. Available in 12 natural shades inspired by the types of wood mainly used for making hardwood floor coverings. Wood effect finish – Reproduces the continuous surface of wood floors.

Kerakoll Fugalite Bio Parquet is resistant to UV rays and waterproof – the finished surface is highly hydrophobic, water-resistant, non-absorbent and does not change colour. This grout is also Bacteriostatic – CSTB-tested. This prevents the proliferation of bacteria and moulds and is also stain proof – as tested by the Italian Ceramic Centre – Bologna (Centro Ceramico Bologna).

Kerakoll Fugalite Bio Parquet can be cleaned easily and complies with HACCP/EC 852/2004 requirements for food hygiene.

Kerakoll Fugalite Bio Parquet is suitable for wood-effect porcelain tiles, low thickness slabs, ceramic tiles, klinker, cotto, glass and ceramic mosaic, of all types and formats. We recommend using a rubber grout float such as the Kerakoll Rubber Grout Float to apply. When cleaning off we recommend using the Kerakoll Cellulose Grouting Sponge along with Kerakoll Fuga Wash Eco as an additive in the wash-water to facilitate cleaning off the grout residue and leave a perfectly smooth surface finish. Use Kerakoll Fuga Soap Eco to remove any hardened streaks or residue from surfaces along with a Kerakoll Abrasive Felt Pad.

Kerakoll Fugalite Bio Parquet Colour Chart

Technical Data:
Appearance: Part A coloured paste / Part B neutral paste
Specific weight: Part A ≈ 1.53 kg/dm3 / Part B ≈ 1.50 kg/dm3
Viscosity: ≈ 120000 mPa · s, rotor 93 RPM 10 Brookfield method
Mineralogical nature of inert material: silicate – crystalline
Chemical nature: epoxy resin (Part A) / polyamines (Part B)
Grading: ≈ 0 – 250 μm
Shelf life: ≈ 18 months in the original packaging
Warning: Protect from frost, avoid direct exposure to sunlight and sources of heat
Pack: Part A: 2 kg bucket / Part B: 1 kg bucket
Mixing ratio: Part A : Part B = 2 : 1
Specific weight of the mixture: ≈ 1.512 kg/dm3
Pot life at +23 °C: ≥ 45 min.
Temperature range for application: from +5 °C to +30 °C
Width of joints: from 0 to 5 mm
Foot traffic: ≈ 24 hrs
Grouting after laying:
– with Kerakoll Fugalite Bio Parquet on coating materials: immediate
– with Kerakoll Fugalite Bio Parquet on floors: as soon as foot traffic is allowed
– with adhesive: see characteristics of adhesive
– mortar: ≈ 7 – 14 days
Interval before normal use: ≈ 3 days (mechanical resistance) / ≈ 7 days (chemical resist.)
– as an adhesive: ≈ 2 – 4 kg/m2
– as a grout: see grout calculator above for estimating how much grout you will need or your application.
Values taken at +23 °C, 50% R.H. and no ventilation. Data may vary depending on specific conditions at the building site, i.e.temperature, ventilation and absorbency level of the substrate and of the materials laid.

Product Datasheet

Click here to view this product on the manufacturers website.

Additional information

Weight N/A

54 – Larix – 3kg, 55 – Betula – 3kg, 56 – Acer – 3kg, 57 – Fraxinus – 3kg, 58 – Fagus – 3kg, 59 – Ulmus – 3kg, 60 – Quercus – 3kg, 61 – Castanea – 3kg, 62 – Milicia – 3kg, 63 – Afzelia – 3kg, 64 – Tectona – 3kg, 65 – Millettia – 3kg