Kerakoll Fuga Soap Eco is an Eco-friendly detergent used to remove stains left behind after grouting with Kerakoll Epoxy Grouts such as Fugalite Eco, Fugalite Eco Invisibile, Fugalite Bio and Fugalite Bio Parquet. Ideal for use in GreenBuilding.
Kerakoll Fuga Soap Eco is a water-based concentrate, which safeguards the health of both operators and the environment. Kerakoll Fuga Soap Eco is an effective and specific detergent for use in cleaning after laying as it can be used in the routine maintenance of ceramic tiles, porcelain tiles and natural stone.
Kerakoll Fuga Soap Eco can be used on both floors and walls, in any dilution ratio with water. It is suitable for use with compact and porous materials, delicate marbles and is ideal also for domestic environments.
Kerakoll Fuga Soap Eco can be used on ceramic, porcelain tiles, glass mosaic, marble and natural stone tiles. We recommend using Kerakoll Fuga Wash Eco as an additive in the wash-water to minimise streaking and facilitate cleaning when grouting with Kerakoll Epoxy Grouts.
Instructions for use:
Preparation of substrates:
The coating materials must first be cleaned to remove any dust. Fugalite Eco, Fugalite Eco Invisibile, Fugalite Bio and Fugalite Bio Parquet must be fully hardened.
Kerakoll Fuga Soap Eco is a ready-to-use yellowish liquid, water-dilutable in any ratio depending on the type of dirt to be removed. Shake the bottle well before opening in order to redisperse the liquid evenly.
It is advisable to perform a preliminary test on tiles that are not to be laid, or in a concealed area. Apply Kerakoll Fuga Soap Eco evenly to the surface to be cleaned with a white rough scrubbing pad and leave it until the dirt to be removed begins to visibly lift; this may take a few minutes or up to 10 – 15 minutes depending on the quantity, the elapsed time after laying (at least 24 hours) and the degree of absorption of the surface. Scrape the surface mechanically with abrasive felt pads. Once cleaned, rinse well and dry carefully. The use of wet vacuum makes the operation easier and ensures the complete removal of residue. In the case of large surface areas, a mechanical buffer with an abrasive felt pad for the removing operation is recommended. Repeat for highly stubborn dirt.
Residues of Kerakoll Fuga Soap Eco can be cleaned from tools by rinsing them thoroughly with water.
Appearance: yellowish liquid
Specific weight: ≈ 1.01 kg/dm3
Shelf life: ≈ 24 months in the original packaging
Warning: protect from frost, avoid direct exposure to sunlight and sources of heat
Pack: bottles 1 ℓ
Water dilution ratios: all ratios
Viscosity: ≈ 211 mPa · s, rotor 2 RPM 50 Brookfield method
pH: ≈ 12.5
Temperature range for application: from +5 °C to +35 °C
Waiting time before cleaning with water: ≈ 10 – 30 min.
Coverage: ≈ 10 – 20 m2/1 ℓ