Everbuild Roll and Stroll Contract Carpet Protector

Description

Everbuild Roll and Stroll Contract Carpet Protector is a clear self adhesive carpet protector, ideal for protecting against mess, dirt, staining, spillages and soiling that occurs during painting, plastering, building, tiling, general maintenance and repair work.

Everbuild Roll and Stroll Contract Carpet Protector measures 600mm wide and is available in 50 or 100 metre rolls.

Everbuild Roll and Stroll Contract Carpet Protector is ideal for protecting stair carpets and can be used for commercial and domestic applications. It is totally waterproof and protects against expensive to clean paint spillages on carpets.

Due to the adhesive face being reverse wound, the protector easily unwinds with minimum effort and no need to bend down.

Benefits:

• Easy roll out with no specialist applicator equipment required.
• Will not creep and wrinkle after application. Stays where it is put!
• Totally waterproof.
• Protects against expensive to clean spillages from paints, varnishes etc.
• Easily removed, will not leave a sticky residue.
• Can be left for up to 4 weeks *.
• Adheres to most common hard surfaces.
• Safer than dust sheets.

Limitations:

• Everbuild Roll and Stroll Contract Carpet Protector is for application to carpets, DO NOT use on hard surfaces. Use Everbuild Roll and Stroll Hard Surface Protector.
• Obviously, adhesion will be reduced on dusty surfaces. Vacuuming or mopping prior to use is recommended.
• The protector must be removed after a maximum of 4 weeks to prevent a sticky residue being left.
• Always check the protector is stuck firmly to surfaces before commencing work.
• On some surfaces Everbuild Roll and Stroll Contract Carpet Protector may leave a residue, this can be easily removed using Everbuild Wonder Wipes or hard surface cleaner. A test area is always recommended prior to full application. Please note when cleaning laminate flooring do not used excess water. Always check compatibility of cleaning agent with sub floor prior to full application.
• In heavily trafficked areas or where air temperature exceeds 22°c, remove the protector after a maximum of 1 week. Do not use underfloor heating whilst product is in situ.
• Do not use the product on surfaces which bleed oils or plasticizers.
• Product may become slippery when wet. Mop up any spills immediately or replace the protector where necessary.
• It is the users responsibility to determine suitability for use. If in doubt contact technical services for advice.

Storage:
Store in cool dry conditions between 5 and 25 degrees C. Safe in normal use however as a precaution keep polythene outer packaging away from children.

Click here to view this product on the manufacturers website.