Everbuild American Duct Tape
Everbuild American Duct Tape is a remarkable new tape which is not only thick, strong and 100% waterproof; it also has the most amazing adhesive quality.
Everbuild American Duct Tape has a multitude of uses including waterproofing and windproofing scaffolding, windows, doors and exposed roofing – it can also be used on vertical and overhead applications due to its unique hold strength. You can also use Everbuild American Duct Tape to temporarily hold DPM, timber, guttering, sheet material or any other building material that needs to be held in place without the need to clamp. Everbuild American Duct Tape will stick to most surfaces and substrates and can be used internally as well as externally.
•Will stick to most common surfaces including polythene.
•Stronger than standard Gaffa tapes.
•Waterproof, can be used in the rain.
•Bright Orange for easy recognition.
•Do not use Everbuild American Duct Tape on surfaces that bleed oils or plasticisers
•It is the user’s responsibility to determine suitability for use. If in doubt contact Everbuild technical services for advice.
Ensure that the surfaces to which the tape is to be applied are clean sound and dry. Remove outer packaging from the roll of tape. Peel required the amount of tape from roll pressing firmly into place while unrolling. Tear off by hand or cut the tape with a knife when finished.
Adhesive Calendered Natural Rubber
Tensile Strength 35 N/cm
Adhesion To Steel 5.0 N/cm
Service Temp -10 to +60°C
Store Everbuild American Duct Tape in cool dry conditions between 5 and 250C. Safe in normal use however as a precaution keep polythene outer packaging away from children as it is a choking hazard.
36 months from date of manufacture.
Click here to view this product on the Everbuild website.