Phone icon

Dukkaboard XL Extra Strength Polyurethane Adhesive

£6.65 (inc VAT)

Dukkaboard XL Extra Strength Polyurethane Adhesive is 100% waterproof polyurethane adhesive and will bond to most common building substrates.

Size: 310 ML

Quantity:
SKU: DUK099 Categories: , ,

Description

Dukkaboard XL Extra Strength Polyurethane Adhesive is 100% waterproof polyurethane adhesive and will bond to most common building substrates.

Dukkaboard XL Extra Strength Polyurethane Adhesive can be applied horizontally or vertically to tile backer boards, walls or battens/beams and gives exceptionally high bond strength.

Dukkaboard XL Extra Strength Polyurethane Adhesive foams slightly on application to fill any small gaps on uneven surfaces and is resistant to most chemicals.

Dukkaboard XL Extra Strength Polyurethane Adhesive can be applied horizontally or vertically to tile backer boards, walls or battens, beams and gives exceptionally high bond strength.

Areas of use

Dukkaboard XL Extra Strength Polyurethane Adhesive can be used internally or externally, to bond most types of wood – (hard, soft, exotic, painted wood) Formica, Polystyrene Foam, PU Foam and glass wool to porous surfaces. Also adheres to metal, stone, concrete, brick, masonry, and various plastics.

Limitations

One of the surfaces to be bonded must be porous. Dukkaboard XL Extra Strength Polyurethane Adhesive is not suitable for polythene, polypropylene, teflon or nylon. Moisture content of wood must not exceed 30% w/w. As Dukkaboard XL Extra Strength Polyurethane Adhesive expands slightly on curing, do not use on sheet laminate. Only apply between 5 and 30 degrees c.

Application

Surface to be bonded must be clean, dust and grease free. Roughen non-porous surfaces to give a key for the adhesive. To achieve maximum bond strength and assist cure, slightly miosten one surface with a damp cloth. Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45 degrees. Apply using a standard sealant gun. Apply adhesive evenly to one surface. If necessary, cover large surfaces with a fine toothed spreader. Assemble parts immediately and clamp for 5 – 10 minutes at 20 degrees, longer at lower temperatures. After this time the joints may be easily handled. Final and full bond strength will be achieved after 30 minutes.

Coverage
1 tube of Dukkaboard XL Extra Strength Polyurethane Adhesive is sufficient for fixing approx 8 no 1200 x 600mm Dukkaboard XL Tile backer boards.

Storage

Store in cool, dry conditions and protect from frost. Shelf life is 12 months, less when the cartridge has been opened.

WARNING: Dukkaboard XL Extra Strength Adhesive is a very strong waterproof glue. Always wear gloves and wipe off excess glue with a cloth. Use solvent in event of spillages.

Size: 310 ML

Click here – Dukkaboard XL PU Adhesive – to view the data sheet for this product.

Click here to view this product on the Dukkaboard website.

Additional information

Weight 0.5 kg