Description

Ardex P82 Epoxy Primer is a two-component water based epoxy synthetic dispersion primer and bonding bridge.

Ardex P82 Epoxy Primer forms a priming/bonding layer on most known substrates, especially smooth or dense surfaces. For interior use only and in dry or intermittently damp locations. Use on floors which are dry and have an effective Ardex damp proof membrane, such as Ardex DPM 1 C and Ardex DPM 1 C R. Ardex P82 Epoxy Primer can be used as a primer and bonding bridge prior to the application of the Ardex range of cement-based tiling and flooring products.

Ardex P82 Epoxy Primer is non-flammable and non-corrosive.

Ardex P82 Epoxy Primer consists of two liquid components – one red, one white – these must be mixed in the ratio 1:1 by weight or volume to produce an even coloured pink liquid. The two components are an epoxy resin and an epoxy hardener.

Ardex P82 is available in two sizes, 2 kg or 6 kg.

These are supplied in the exact proportions so the entirety of each component must be fully mixed together. Pour the required amount of Part A (red) into a suitably sized clean container and add an equal volume of Part B (white) and mix together with a slow speed electric drill and a suitable mixing paddle until a uniform pink colour is achieved.

Coverage:
5 to 10m² per kg of mixed primer, depending on the surface to be primed and the method of application, i.e. 10 to 20m² per 2kg unit and 30 to 60m² per 6kg unit. Do not exceed the maximum coverage of 20m² per 2kg unit and 60m² per 6kg unit i.e. 10m² per kg of mixed material, as the primer must have sufficient thickness to ensure a continuous even film is formed across the entire primed surface.

It is recommended that the floor areas are measured out into 60m² areas and the 6kg units of Ardex P82 Epoxy Primer are evenly spread over this floor area to help ensure that the coverage does not exceed 10m² per kg of mixed product.

Product Datasheet

Click here to view this product on the manufacturers website.