Ardex DPM 1 C Rapid is a rapid drying damp proof membrane that can be overcoated after 4 hours, it is a one coat rapid drying two component epoxy resin, ideal for fast track installations.
Ardex DPM 1 C Rapid suppresses residual constructional moisture in all concrete slabs and sand cement screeds and can be used where no DPM is present or ineffective.
You can apply Arditex NA or Arditex RS PLUS directly to Ardex DPM 1 C Rapid without priming. Latex Levelling Compounds must be applied within 16 hours of the final cured coat. If this time exceeded then prime with Ardex P82 or Ardex P4 primers.
Supplied in pre-gauged units of 6kg and 10kg packs.
After hardening, Ardex DPM 1 C Rapid produces a membrane which can accommodate hygrometer readings up to 98% with high inherent and bond strength. It has excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids. Comes in a metallic grey colour.
Ardex DPM 1 C Rapid has been specifically developed to provide a DPM or to suppress residual moisture in concrete slabs and cement sand screeds that are dense, well compacted and sound, where readings of up to 98% RH can be accommodated.
Ardex DPM 1 C Rapid can be applied to give a dry film thickness of 250 microns where all surface moisture readings are below 85% RH. The product should be used at a dry film thickness of 350 microns where any surface moisture readings are between 85 and 98% RH.
2.5m2/kg at 250 microns
1.8m2/kg at 350 microns
Density at 20°C: 1.54
Working Time: 20 minutes at 20°C
Over Coating if required: 4 hours at 20°C